Hi everybody.
I have a problem with regexp usage in "include" command. I'd like to show specific lines in FDB which contains something like "v\d{4}". Letter "v" and four-digit number.
hi,
I have 2 swicths X670v-48t with 2 stacks of 40 G each. Firmware version 15.6.1b.4. Only I have configured vlan "Default" on all ports. I created a dynamic LACP "enable sharing 1: 1 grouping 1: 1, 2: 1 algorithm-based L2 address lacp". I created ...
How can I balance traffic between some http servers using extreme networks switches?
We use cisco IP SLA with static routes now, but I found no solutions with extreme networks switches. Does anyone know if there is "Server Load Balancing" functional...
Hello, colleagues!
IF-MIB::ifDescr.1000133 = STRING: VLAN 01000 (XXXX)
IF-MIB::ifDescr.1000134 = STRING: rtif(172.16.0.13/24)
but how we can know what vlan have his rtif?
can we see primary and secondary IP?
thank you!
i could not able to get the power on the port 9 and 10 where the power is working in other ports in the same line card. please find the below logs and kindly help me to resolve the same or kindly confirm is it a hardware failure
...
