ExtremeSwitching (EXOS/Switch Engine) - Page 758 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How do I configure a VLAN to act solely as a routing VLAN for the other vlans to use for routing purposes?

Hello All, I am working on two x460-G2 switches that are stacked. We desire to have 4 vlans, each with a separate IP Space, and create a 5th Vlan, that acts as a routing VLAN which will have a port that is a link to our core routing device. Our idea...

can't ping from core switch any vlan ip add!

Hi all, so, i configure my core switch (stack of 2 X670V) with different vlan interf ip adresses. all my configuration is on the vrf-default. i'm trying to ping in my core switch his interface but i have response "Packet transmit error; Destination...

Ethernet loopback test failed, is it a physical failure ?

Hi there, I noticed that i have problem with ports on switch summit X450a-48t, it stops forwarding traffic randomly, so i did a show diagnostics : (is it a physical problem) ? Slot-1: X450a-48tLast Test Date: Wed Nov 12 13:25:20 2014 Ethernet loopba...

V320 Stacking - 2 x X670v-48x

I'm trying to stack two x670v-48x's together using two 80Gb ports on each of the VIM4-40G4X modules. Questions about stacking are: - What is the physical connection of the stacking cables between two switches? Port 1 (SW 1) -> Port 2 (SW 2) | Port...

stacking 2x X670V with 2x VIM4-40G4X

i want to stacking 2x X670V with 2x VIM4-40G4X, how i can do this please? i read the config guide but it's not realy clear. i want to have 2 x 40GB satck ports on vim! on my config, i do this: switch 1: configure stacking-support stack-ports 1 sel...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN