ExtremeSwitching (EXOS/Switch Engine) - Page 76 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Stacking without DAC

Hello communityI want to mount new swtichs in stack mode, except that I wonder if I can mount my switches (Extreme 5320) without DAC cables.Let me explain, I would like to set up a stack of 3 nodes except that I do not want to use DAC cables but rath...

5520-48W Stack Cable Change

Hello, I have a stack of 4 5520-48W switches and I need to change the stacking cables. There are currently no errors and everything works fine. However, when the stacking cables were sourced, one was too long and another too short. I have since be...

5320-16p poe budge quest

Hi SirsI check the 5320 datasheetthe 5320-16p poe power budge is only 185w , so if every device which connect 5320 need 15.4w power budge , does the 5320-16p only use 12port POE ?185w/15.4w=12.01...

FN-2023-481 - X440-G2-48p-10GE4 with part number 16535A may ship with pre-GA 31.7.1.3 installed

We have a new field notice related to the X440-G2-48p-10GE4 devices that may have shipped with pre-GA 31.7.1.3 installed. Notice SummaryX440-G2-48p-10GE4 with part number 16535A had a series of units loaded with pre-GA 31.7.1.3 in the factory. Pleas...

How do I export the default route, to a neighbor, via OSPFv3?

Hello!How do I export the default route, to a neighbor, via OSPFv3?Analogous to the team from Cisco: default-information-originate alwaysExtremeXOS version 15.5.2.9 v1552b9-patch1-5

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN