ExtremeSwitching (EXOS/Switch Engine) - Page 782 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Port flap on LACP load sharing group causes permanent network loop

Had a neat issue that killed our network the other day. Tracked it down to a flaky port on a single switch that was connected to a stack with LACP. I was able to reproduce the problem. Take a stack and LACP load share one port from each stack memb...

Process system 99%

Hi I´m having this problem with some summit switches I have, once in a while I lose conection with my switch this happens once or twice per day, I notice this because of my monitoring tool. I have been checking my switch and executing the command s...

DHCPv6 Prefix Delegation?

Is there any way to handle prefix delegation to end-user devices in extreme? Im familiar with DHCPv6 prefix delegation to hand out subnets to NAT routers, but dont see this functionality in extreme.

Port Priority

Hi I'm currently using a summit switch x440-24p and I want to give priority to all the ingress and egress traffic for a specific port. How can I do this? Is its by configuring a QoS Profile or is this possible by any other way? Thanks.

create an upm event that triggers whenever a user logs in to the CLI

I am trying to create an event trigger that will fire any time a user logs in to the switch. The problem I am running into is that I am trying to make a generic script that will set this up on several switch stacks on my network. Is there any generic...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN