ExtremeSwitching (EXOS/Switch Engine) - Page 82 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Network Dropouts at Peak Times

Hi everyone,We have an Extreme stack consisting of 3 440g2 48p PoE that have recently started to drop out when traffic is heavy. I've not had this happen with this switch stack before, we have been running it just over five years. I have not made a...

Support of MacSec

Hi,Customer is requesting 100x 5420M-24T-4YE+ with PREMIER and MacSec licenses and AHR NB service contract for 5 years.The services code for the 5420M is 97004-5420M-24T-4YE but does it cover MacSec and PREMIER lic support?Adding TAC 5Y for MacSec an...

Spanning Tree Configuration Detailed step by Step

Dear Gentleman and Ladies i hope you have a nice daykindly guide me with command to create Spanning Tree configuration for two XG440 Switches Also if i want to clear the existing one could you provide how to do this ? Thanks in advance

Ingress ACL Block traffic to Private networks and Enable establish from Private Network

Hi GuysI am managing and testing an EXOS x435;Setup:Ingress ACL to VLAN8 to block all private traffic:source VLAN8 destination All Private networks 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16Apply rule to VLAN8 in Ingress (only), everything works.butI ne...

Resolved! Spanning Tree - * next to port

Im trying to troubleshoot a spanning tree blocking issue. When I try to reproduce the issue in my lab I cant seem to do it.The only configuration difference I can see between my lab and production switch is if I run the show stpd detail command when ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN