ExtremeSwitching (EXOS/Switch Engine) - Page 83 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

SIP-T21(P) E2 YEALINK IP PHONES IN THE NETWORK CREATE CONGESTION ON PORTS

Hi, Can you please explain it in more detail, I could not get it correctly. --- Thanking You Abhijit Roy IRCC, IIT BOMBAY Sr. Executive-II, Technical On 2022-05-19 18:54, Gabriel_G via Extreme Networks wrote: Hello, Could you confirm how l...

SIP-T21(P) E2 YEALINK IP PHONES IN THE NETWORK CREATE CONGESTION ON PORTS

Hi All, I am facing an issue in last couple of months, I have 4 no's of X440G2-48p-10G4 access switches in the network, one of the switch in the network got connected with above mentioned IP Phones like as follows due to scarcity of the physical...

Stack link blocking election

I have a stack in a ring topology with 5 x460g2-48t-4ge10 and the link between stack-ports 3:2 and 4:1 looks to be bad. I have already changed cables, etc to bring it down to being just one of the ports flapping. I have rearranged the stack to go 1-2...

Troubleshoot an RDP ACL

Hello All,I am trying to create an ACL where certain subnets can RDP "port 3389" into a different subnet's hosts. While other devices can't RDP to that certain subnet. I am pasting the ACL, I have created. Basically, 10.8.7.X subnet should be able to...

Remove meter on X440-8

Set this up so long ago and lost my notes. Trying to either update or remove the meters on a few ports. Removing would probably be fine. This is the internet switch and was in place when there was only a 100mbit connection, now it's 1Gbit, so these r...

Top Kudoed Authors

User

Count

28

26

20

19

17

GTM-P2G8KFN