ExtremeSwitching (EXOS/Switch Engine) - Page 834 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Help required for L3 - Policy Based Redirect. Summit x460-24t, ExOS 12.5

Create Date: Sep 12 2012 8:53AM Hi all, I am facing a very simple redirection problem while using my Policy based redirect on the Switch. I have a dynamic policy defined for redirection as below on my Switch. And I apply it as ANY on the switch. ...

Stacking - adding nodes and blocked links

Create Date: Sep 12 2012 2:13PM Hi all, Apologies if these questions appear elsewhere - I couldn't find them in a search. I have two stacks, currently 2 switches each. One is X650-24t & X460-48t, the other is 2 x X460-48t. All switches are runnin...

TO Stack or not to Stack that is the question?

Create Date: Sep 12 2012 7:55AM Hi We have two x670's as our core with x460 / x440 as edge switches, I'm wondering whether to stack the x670's or to link them via uplink ports. the reason i ask. is yesterday we tested a link failure between the tw...

Serious problem for snmp and ipv6

Create Date: Sep 7 2012 5:08AM Today i use summit x250 and 450 series switch and test get snmp infomation through IPv6,found if firmware was 12.x.x.x it w you will getill ok but when use version 15.x.x.x that switch will be reboot,so if you use 15...

'Summit X450e' Admin account password forgot :(

Create Date: Sep 17 2012 6:33AM Hi All, We installed one Extreme Network's 'Summit X450e-48p' switch in our organization. Unfortunately, we forgot it's admin account password and we don't have any other account on this switch to work on it. Anybo...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN