ExtremeSwitching (EXOS/Switch Engine) - Page 840 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

QoS on specific TCP port.

Create Date: Jun 28 2012 10:48AM I'm new, and need help setting a QoS profile for a specific TCP port. How would I set a profile that prioritized traffic to and from a specific ip port? For example give all traffic from TCP port 2000 a priority ...

Further ACL problems

Create Date: Jul 12 2012 4:07AM OK here's a challenge. How to permit IP and ICMP Pings from a list of 40 subnets in an ACL.Should be straightforward? I thought so until I tried and realised the resulting ACL would be (40*8)+(40*7)=600 lines long!...

Limiting bandwidth usage to remote sites

Create Date: Aug 9 2012 9:43AM I have a couple of questions that I was hoping to get clarified as to how they work. I am completely stumped and any help would be greatly appreciated. When applying a static ACL policy (i.e. - bandmax.pol) on a Sum...

summitx 440 and 350 cpu spec

Create Date: Jun 25 2012 7:29PM Did anyone fell 440 slowly than 350, when i use console port telnet to 440 and 350 i fell 440 always slowly than 350,so did anyone can tell me 440 and 350 cpu spec (from Hsu_LiPing)

ACL and STP

Create Date: Aug 8 2012 12:54AM when I apply a "permit all packets" rule, I get the warning: Note: An unconditional PERMIT action on an EAPS or STP blocked port will result in a loop. Adding an explicit match criteria such as ethernet-type will avo...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN