ExtremeSwitching (EXOS/Switch Engine) - Page 841 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Switch in stack with wrong XOS

Create Date: Oct 3 2012 10:22AM Hi all, I have a switch in a stack that's booted a different version of XOS to the other 3 switches. The switch in question is displaying the "pending aaa ...." so we can't login to it from the console. I was goi...

Does anyone know in switch has Displays packet forwarding information

Create Date: Sep 28 2012 1:37AM Does anyone know if there is a similar functionality in EXOS to Cisco Displays packet forwarding interface... In Cisco Nexus it has "sh port-ch load-balance forwarding-path interface port-channel ...." command (fro...

Freeradius setup - version??

Create Date: Oct 5 2012 9:32AM Hello, I am attempting to set up freeradius with my switches according to: ExtremeXOS® Concepts Guide Software Version 15.2 Especially the section regarding the profiles: "Command authorization is also managed on...

Add new node to stack

Create Date: Oct 9 2012 3:03PM Is the process of adding a new node to a stack disruptive? Will it cause downtime? IS it possible to downgrade the firmware on a switch to match the version in the stack? Can you confirm that this is the correct pro...

MLAG to ESX

Create Date: Sep 26 2012 6:43PM okay i have 2x x670 connected to 3 esx hosts. ports 1 to 3 on the x670's correspond to esx01 esx02 and esx03 and the esx hosts have dual port nics. port1 goes to x670 1 port 2 to x670 2 esx ports are mlaged esx0...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN