ExtremeSwitching (EXOS/Switch Engine) - Page 91 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Unable to reload EXOS on X440-G2 prior member of a stack

When I run a config no in the bootloader it does not clear the config so I am attempting to reload the firmwareI believe I am following the proper steps to reload the firmware on this switch to default it. Unable to though.BootRom > download image us...

Does EXOS (30.6) really support CHAP authentication instead of PAP.

Hi,First of all, my lab environnement has been made made with:-a X460G2-48t-10G4 in EXOS 30.6.1.11 patch 11 version.-a windows NPS server. I tried unsuccessfully to configure radius authentication using CHAP .It works with PAP protocole but security ...

10G SPP+ on a x440

Hi,I'm trying to connect a x440 to a VSP7400 with 10G links.When I insert a SFP+ (Extreme Networks 10302) the x440 gives the following error:<Warn:HAL.Port.OpticNotCompatPortType> The SF+_CX1m optic module is not compatible with SFP ports - please re...

Resolved! Netlogin: assign vlanid and isid via NAC

We are implementing an Aruba Clearpass as a NAC-System with our 440G2-Switches. Assigning the vlan id via Clearpass works well so far. Since we want to use FA-Features in the future we need to also assign an isid along with the vlanid with clearpass,...

Latency for 64-byte packets - Universal 5000 Series

What are the latency values for 1Gbps and 10Gbps for Universal 5000 series switches?Including 5320, 5420, 5520 and 5720 switches.

Top Kudoed Authors

User

Count

28

26

20

19

17

GTM-P2G8KFN