I want to use SFP RJ45 modules on X430. I don't have extreme branded module (part number 10050) but grab an OEM one to test. Whet I plug the module to X430 it logs this:
Media 1000T is inserted into Port 26
But when I plug a laptop to the module, no link comes up. X430 does not logs anything either. So is there any configuration to be done on the switch to use the module or this means the OEM one is not compatible with X430?
@EtherMAN Yes, what I want is to use 25-28 ports for end user connection. I found the problem BTW. The OEM module was 1000T only, not 10/100/1000. So it did not worked with my laptop which is Fast Ethernet.
@EtherMAN Yes, what I want is to use 25-28 ports for end user connection. I found the problem BTW. The OEM module was 1000T only, not 10/100/1000. So it did not worked with my laptop which is Fast Ethernet.
True for sure... the 1000T can be very sketchy for sure... WE have had hit and miss through the years in other switches that were all X ports like a 670 or a 48 port 8900 blade.
Why not just use a pair of SX optics and MM patches... I would bet they would be pretty close to the same price as a 1000T and a cat 6 patch. I guess you are trying to use ports 25-28 because all the other ports are in use?
