summit 48si in combination with a windows dhcp server and a seperate tp link router

[cas_2004]

i configured the switch with 5 new vlans in different subnets, ipforwarding is enabled in all of them. 1 is for a connection to the internet so there is also a default route to the router. i also got a vlan for servers where i have a windows dhcp server connected with scopes for 4 vlans. on the router there is a static route back to the switch. i can access the router from every vlan and the dhcp server also works fine in every vlan but i don't get any internet and it's also not a dns problem. i attached a file with my documentation of what i did, its in dutch but all the commands arent any different 

[cas_2004]

and btw, the switch itself can reach public dns servers trough the switch but not the clients (but they can reach the router)

[Chris_H]

do the clients have the right default gateway configured or at least a route out?

edit: when trying to ping externally, can you see traffic egressing the switch-link to the TP link router? if so it may be on that side..

[OscarK]

btw, this is not an exos switch but extremeWare. very old and some commands might differ, although most of them are the same. Just basic routing.

[OscarK]

Is finding the solution not part of the opdracht (assignment) ?