Hey, guys! We're stacking four X460-G2 and while trying to save the configuration we get the following error: Slot-1 Extreme_CAE.10 # save conf The configuration file primary.cfg already exists. Do you want to save configuration to primary.cfg and ...
There is physical loop detected on Extremex250e-24t switch,due to this entire network went down at one of our customer site. Is anybody can help me how to block the port if the loop is detected on the switch? So that in future if physical loop detec...
Hello, do combo ports ( ethernet/fibre ) on x250e-48p/ extend stacking capability ?. I do have a stack of 2 switches, i am planning to create another stack of 2 switches in a different building .. am using fiber and copper for redundancy . since i ...
Multiple stacks of 450e switches are taking large numbers of rx over errors on all stack ports . Image 12.3.1.2 We are trying to upgrade to 15.3 but are having trouble getting the code through. Does anyone have any ideas for this?
I'm assuming that reboot stack-topology will reboot all 3 switches in the stack and have them come back up without changing slots. Is this true or is there some other way that I should reboot them?
