ExtremeSwitching (Other) - Page 157 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Dynamic ACL Application

Hello, i am working with dynamic ACLs and i have multiple ACLs for applications like RDP, HTTP, HTTPS is there any way i can reduce the number of lines in the following ACLs or i can specify multiple port numbers in one line. so i can reduce my confi...

Remote Site Dual Link using IP Route Sharing

we are planning to add another WAN Link connection to our remote site, can we use the ip route sharing over WAN Link? WAN link is L2 connection provided by telco. Link 1 - VLAN 100 Link 2 - VLAN 200 thanks

Howto setup antispoof o S8

We have an S8 with two ST1206-0848-F6 cards and firmware 8.31.3.2 We are trying to setup antispoof but the binding table is always empty. We have DHCP servers on ports lag.0.4-7. The commands: set antispoof dhcp-snooping enable lag.0.4-7 set antis...

S-Series DHCP problem and ip route add default, version 7.22.02.001

Greetings. I have a chassis S6 that should give for 70 DHCP address pools with mask (/ 25 and / 24). Each pool has a corresponding VLAN (30,31,32 ...). For example: VLAN 1 - 10.17.3.231/24 (ip address for switch.) VLAN 30 - ip 10.17.30.1/25 ...

Question about Cisco - Enterasys integration WLAN

We have a complete new enterasys infrastructure with some older Cisco devices. How do i have to config a cisco switch port to work together with a enterasys AP ? Our Management VLAN for the Wireless AP´s is VLAN 99 and all the Client Access VLAN´s...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN