ExtremeSwitching (Other) - Page 167 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Simple .. perhaps stupid NAT and Routing Questions

sorry .. for (perhaps) stupid questions .. but until now i never needed Routing an NAT . We are a little public School in germany and into the last 15 years we had a pure public Network, every printserver had a public address because we have a full ...

KVA switches Extreme

I have to enter 1 switch X460-24t and 1 switchX430-24t to a Data Center, ask me a value of KVA, could someone tell me what these values for these switches, some documentation where find this. regards

Config style change in B-series v6.7?

We have some B- and C- Series at v6.6 and a B-series at v6.7 The configuration of v6.7 looks weird, the ports are listed by intervals of 10. Example: ######################################################### ->show version Model Serial #...

tNetTask & CPU Load

Hi, I have a problem with a Enterasys G3 and CPU load: through MRTG monitoring tool I known that the CPU goes to 98% for a few minutes and then stabilize at around 15-20%. Sometimes this peak causes a reboot of the device. During the peak load, tNetT...

dhcp ip allocation for particular vlan

hi , we have extreme networks summit x460-24t switch . I want to do the following switch should assign ip to dhcp client for particular vlan . All packet IP's unknown to switch should be passed from port 1 . example in cisco we had ip dhcp pool vl...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN