ExtremeSwitching (Other) - Page 180 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

VoIP video problem

We are putting out new Extreme switches (x460 and x440) into different buildings. We are running 15.3.2.111. We use cisco phones for our VoIP. We have models 8945 and 9951 which also provide video. They have worked great in our test building (whi...

"Default[1.tHostRecv]arptnew failed on c0a8c882"

The log file shows the following error message. DFE Platinum FW 06.12.03.003 "Default[1.tHostRecv]arptnew failed on c0a8c882"

Enterasys DFE : Webview: Interface Utilization , RMON History strange values

Hello, we have an Enterasys N3 DFE with version 5.42.10 . When I check by CLI "Rmon history" statistics I see that an interface have "Utilization(%)" value "4", but If I check the Utilization of the same interface by Webview, section "Rmon History" ...

Switchs B and A series default trap

Hi, a question about switch B and A series: when trap generation is enabled in the switch, how can i know the list of trap generated by default ? I cannot find this list in the manuals.

switch port is not present

Hi, I have an extreme X350-24T switch.Its having 24 copper ports and 4 SFP's(Shared ports). I tried to connect the uplink cable to 25th and 26th SFP ports but port status showin 'NP'.. Could anyone help me in this..? PFA

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN