ExtremeSwitching (Other) - Page 181 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Any hint how to configure Cisco WCCP-Feature within K-Series

Dear Community, i recieved a request i would like to answer with a enterasys K6, the only point i found is the request of beeing capable of doing WCCP redirect do communicate to an ironport. Is this doable with K6? Thanks, _ToM

Configuration of static dhcp binding on d-serie Switch don ́t work

i Need to config some dhcp Clients on my D2G124-12P with a different Gateway ... all Clients are in the same subnet . Following Config don´t work : set dhcp enable set dhcp exclude 192.168.46.2 192.168.46.10 set dhcp exclude 192.168.46.199 192.168....

interconnect C3 with Cisco ASR1001 over copper at 1gb not working

I am trying to establish a 1 Gb link between a C3 switch and a Cisco router ASR1001. Until now the highest speed obtained is 100 Mb FD. The cabling in between is brand new certified cat6.A Patch cables idem dito. Distance is about 60 meters. Conn...

Unable to ping by source interface

I'm having an issue using the -I (source_interface) option on the ping command on S-Series code version 8.11(.04.0005). I checked that the vlan.0.92 interface is up, but it is not allowing me to send the echo request. Router(su)->ping -I vlan.0.92 1...

VSB feature behaves similar to a stackable

Hi Chris, thanks for your explanation. I think your first suggestion might be an acceptable workaround. It still assumes that our customer always has (to have) a backup of the latest configuration, preferable saved on all slots of a bond. Then a "con...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN