ExtremeSwitching (Other) - Page 38 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Integration CISCO Switches into Enterasys NAC

We have a customer who has a small network with 20 Cisco Switches, 2960 & 3560 and the customer want to switchover to Enterasys / Extrem. We have as a first step a new SSA150 System and the whole software Suite with NMS and NAC on the customer site....

Disable Reset Button-Industrial Switch ISW-16802

Hi Team, Can we disable reset button for ISW-16802 so that no one can disturb the configuration of the switch Physically onsite?

Which 10Gb Switch to use

We have 2 switch models (x460, x670) in our environment that are running 10Gb SFP+. My one problem I have with them is that these are fairly large in size and port density for some of our locations. For instance we have an x460 down by one of ou...

software version 1.02.05.0012

Hi! We've got an unresponsive Switch after two days running this version on our test corner, even the console gets unresponsive after username and password typed in. No logs concerning this issue. We need this or a successor firmware version to get ...

How to control traffic flow between vlans - with ACLs?

Hi gents, When you need to allow only certain "clients" to access a VlanX. And the way those clients could get to VlanX (or any other Vlan) is via VE in/on VlanZ - think of that VE as the gateway for those "clients" to get to other Vlans. Would you...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN