ExtremeSwitching (Other) - Page 60 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

Multicast forwading inter-VLAn without default gateway, TTL=1 and PIM enabled

Hello. We have a BD8806 with several VLANs. We have PIM enabled and multicast routing between these VLANs. The problem is the following: A special IP device connects to one of the VLANs and send multicast packets that should reach the other VLANs....

Extreme 220 Series: Multiple Supplicant 802.1x (PC and Phone) on the same port

Hello I have a computer and a phone on the same switch port with different vlans working (VOIP VLAN configured). Is it possible to authenticate both (phone and computer) on the same port over dot1x (radius)? I don't find any documentation for multi...

Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?

Can we enable stack on already been configured X440-g2 switches or does we have required default setting for enabling stack?

Summit stack dual master

Hi expert, My customer X460 stack have dual master several times, may I ask what kind of information I need to ask him to collect for this issue? Is the show tech enough?

X460G2-48x-10G4 SFP Ports behavior not expected, are in active state without a link plugged.

Hi, X460G2-48x-10G4 Version summitX-22.4.1.4-patch1-2 I have a physical ports issue with my new Extreme Stack topology (2 slots); the master slot (Switch 1) is showing a NON-expected behavior on SFP electrical ports, when the Switch boots up after...

Top Kudoed Authors

User

Count

28

4

4

3

3

GTM-P2G8KFN