ExtremeSwitching (Other) - Page 92 - Extreme Networks

ExtremeSwitching (Other)

Questions and discussions about switching in general

Forum Posts

Sorted by:

Start a conversation

automatic switch configuration when replaced with a faulty switch in a stack

I am running 4-5 stacks consisting of 5 or more switches in a campus. I wanted to know if it is possible to auto configure itself in a stack when i replace a faulty switch with a new one. ( only replacing the faulty switch with a new switch ). I am u...

stacking problem in X670-G2

Hi ThereWe have two X670G2-48x-4q and want to stack them to each other. we use V160 and easysetup according to following document. (EXOS version, License Level and Active Partition are same)https://extremeportal.force.com/ExtrArticleDetail?an=0000804...

Switch SecureStack A4H124-24 won't boot.

SecureStack A4H124-24 keep in looping and won't boot. Message: "Last switch reset caused by Fault(0x00000100) SRR0(0x012B17D4) SRR1(0x0000B002) DMISS(0x10002E8C) IMISS(0x00000000) DAR(0x00000000) DSISR(0x00000000), after 1 seconds"

Remove switches one by one in Enterasys B5 Secure Stack

I have a stack of 8 Enterasys B5 Switches in a "ring" stack. I am moving to X460G2s and have moved 3 of the bottom B5 switches to the 460 stack. So Switches 6-8 can be removed. Can I just "clear switch member 6-8" and then remove them from the sta...

2017-02-27: New GTAC Knowledge Articles February 12 - February 25, 2017

Here are the new articles that were published February 12 - February 25, 2017 in GTAC Knowledge: Sunday, February 12, 2017: none Monday, February 13, 2017: S4 not dynamically learning an arp response from a specific host/IP Tuesday, February 14, 2...

Top Kudoed Authors

User

Count

28

4

3

3

3

GTM-P2G8KFN