ExtremeSwitching (VSP/Fabric Engine) - Page 4 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! mgmt clip IP not accessible

Hello,We are using 5520 switch running voss. It is acting as L2 switch and connected to firewalls. There are couple of L2 vlans configured on it. To manage those switches, I have configured mgmt CLIP IP. But CLIP IP is not accessible from network. Do...

Auto-sense Fabric Attach AP ports doing NEAP authentication on wifi clients

I have an XIQ AP410C connected to a 5420 running Fabric Engine with auto-sense enabled. Fabric Attach is working fine, and the AP is also put onto the right VLAN and authenticated. The AP drops the clients onto the correct I-SID via FA, but the switc...

Testing endpoint tracking

Hi all,I would like to test endpoint tracking on a lab Esx/vCenter. I already have Extreme Control and management Center working with Edge ERS, but...I never used port authentication on VSP right now and I have no idea of the kind of rule I need for ...

Fabric Implementation

Hello! I have a new job and one of the first tasks is to implement Fabric Connect. The previous admin had ordered 10 5420 switches (which are onsite) and I have a design of sorts that has 3 stacks in an EAPs ring (of sorts). Initially I was confused...

Resolved! Fabric Extend behind Firewall

Hi, I am going to be setting up fabric extend using a pair of XA1480s. The headend switch will be in a data center behind a firewall. The other, at a remote location plugged directly into the internet circuit.For the DC side, I am planning on creat...

Top Kudoed Authors

User

Count

29

15

14

11

5

GTM-P2G8KFN