ExtremeWireless (General)
Questions and discussions about wireless in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! AP blinking (LED status) checking status

Hi all, with the newer Wifi 6 APs (305C,410C,510C) i would like to know if i can check with a CLI command the reason why an AP status led is blinking. I know they do that if there is a PoE issue but I had cases were they stopped blinking after i plac...

AP410c Weird Dips In Service

I've been investigating a possible WIFI issue I am seeing some weird readings from the usage bar on a particular access point. There are several dips during the day where clients, cpu usage and memory usage nose dive to 0. I'm assuming this means the...

chart (1).jpeg chart (1).jpeg
BryonKE by New Contributor
  • 1463 Views
  • 3 replies
  • 0 kudos

Zigbee/Thread?

Hi there,I keep reading in product announcements, quotes, and specifications that Zigbee/Thread is supported on certain Extreme Networks access points.What is the status there? Is this actually supported?If so, from which access points?And how does i...

Resolved! APs rebooting due to adoption timeout E2122 appliances

Hello,All the APs in one of our sites were rebooting due to adoption timeout. The poll timeout was set to the default (3 seconds). We rebooted the APs and that seems to have fixed it but we have seen this messages before on some APs. I changed the po...

reboot timeout.PNG
froggy by New Contributor III
  • 711 Views
  • 4 replies
  • 1 kudos
GTM-P2G8KFN