problem to connect wireless controller c5210 to access point in different vlan

[Mikaeil_Beigpou]

i have problem to connect wireless controller c5210 to access point in different vlan.
how to configure my controler to solve yhis problem. and work correctly in different vlan.

[Umut_Aydin]

Hi,

recommend is to use a physical port.(esa)
Then you have to enable AP registartion on that.
You need provide IP connectivity between AP and the Controller ( routing or switching)

Regards
Umut Aydin

[Ronald_Dvorak]

https://community.extremenetworks.com/extreme/topics/how-to-access-ap-3825i-web-interface
https://community.extremenetworks.com/extreme/topics/active-status-access-point
https://community.extremenetworks.com/extreme/topics/topology-error-inactive-topology
https://community.extremenetworks.com/extreme/topics/enable-radio1-and-radio2-at-access-point-connec...
https://community.extremenetworks.com/extreme/topics/how-to-discover-c5210-controller-access-point-w...
https://community.extremenetworks.com/extreme/topics/how-to-active-access-point-ws-ap3825i-connect-t...
https://community.extremenetworks.com/extreme/topics/how-to-change-topolgy-from-inactive-ap-mode-to-...

http://www.extremenetworks.com/education/courses/ESE-HI-1/