Roaming between sites

[JohanHendrikx]

If I am correct, you can assign 32 Ap's to a site. So if there are more then 32 AP's, you have to create a new site.

In the logging of the EWC I see de-registration of clients and the additonal detail is that the cause is roaming between two different sites.

Is this roaming or a disconnect at AP1 and an connect at the AP2 ?

[Ronald_Dvorak]

Is the controller on a central site and the APs are connected via WAN and you need the sites funtion for local 802.1X authentication if the WAN link is down.

Because that is the only reason you'd need sites.

[JohanHendrikx]

Because I have more then 32 AP's on one location.

And then I see that behavior in the logging