WDS Link Expected TX/RX rate

[Valter_Veiga]

Hello,

I have a WDS Wireless Link with 2 AP 3965i-ROW between to building with a distance of 30 Meters.

Setup: Last Firmware V10.31.04.0009

Using 802.3at PoE

Agregation Lan1 and Lan2

Channel 104 : (5500 , [5520], 5540, 5560)

Output: Rx Rss -58

What is the Expected TX/RX rate in this case ?

https://cloud.kapostcontent.net/pub/7dc1aa5b-da46-4460-a96b-f52e3a7dd0a0/ap-3965-data-sheet.pdf?kui=...

[Valter_Veiga]

Why Not 4 streams in WDS Link?

In the datasheet you have, Data Rates MCS0 to MSC9 with Data Streams 1 to 4 and Channel HT20, HT40, HT80.

In the Data Sheet, Maximum Throughput 5GHz Radio 1.732 Gbps and Number of spatial streams 4.

Then you have the Receiver Sensibility.

The picture I send, you have the Rx Rss of -58.

What should be the teorical value of RX/TX ?

In the controller, were can I see the MCS negociated?





VVeiga

[Volker_Kull]

So what is the real bandwidth you have ? What do you expect ? do you have a problem ? More info is required !
If you use a 4x4 AP with integrated antennas without reflections or dedicated antennas you will not have 4 streams p2p active.

br
Volker

[Valter_Veiga]

Hello,

This is a 3965i, the antenas are integrated 4x4:4, I think is using 4 Stream .....

Volker, the real TX/RX is higher.

[Valter_Veiga]

780/780

[Ronald_Dvorak]

what's the value in rx/tx rate ?