Adding new SSID in disabled state

[RobertD1]

Hello,

Is it possible to add a new SSID to an existing Network Policy. in a disabled state and then enable the SSID selectively by AP, cabinet by cabinet?

Thanks,

Rob

[Christoph_S · Accepted solution]

Hello Robert,

You can't do it the way you mentioned in your message; however, what you can do is create an SSID as well as a Cloud Config Group CCG in which you will add the APs from which the SSID will be broadcast. Create a classification rule and select the CCG for said SSID. Push the config to the APs. This way, only APs that are included in the CCG will broadcast the SSID. You can modify the CCG anytime by adding or removing APs from the list. 

These instructions may help: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000114999

BR,

[RobertD1]

Thanks Christoph!