I need to migrate a 3917 from a 5210 controller to CloudIQ. I have been looking for documentation that would describe the process. I plan on adding the device to CloudIQ and then defaulting the AP and hopefully it will be discovered. If there is a...
HiI’m experiencing some strange behavior with a vast majority of clients.They will connect with a good RSSI/SNR well beyond any roaming threshold, but constantly disconnect and reconnect to the same AP and radio.Below is an example of one client who ...
Hello,I recently see the issue at home with a XIQ Connect and AP305C. Connected to an internet box which is the DHCP server, flat network on vlan 1 only, no switch.All clients are getting an IP through the WiFi except one, a Samsung S10. To solve the...
I have a VGVA configured on our corp network to terminate L2 VPN tunnels from EIQ AP’s used by staff working from home. This has worked well with PSK SSID’s. The user plugs in the AP, connects it via an Ethernet cable to their home router and off we ...
Hello everyone,after uploading the newest firmware to the accesspoint I tried configure the client-mode via CLI. The web ui offers the possibility to scan for networks and then connect to a ssid. But the list of ssids remains empty and when manually ...
