ExtremeWireless (IQE) - Page 16 - Extreme Networks

ExtremeWireless (IQE)

Questions and discussions about IQE devices (formerly known as Aerohive devices)

Forum Posts

Sorted by:

Start a conversation

Client does not get IP from DHCP server

Hello,I recently see the issue at home with a XIQ Connect and AP305C. Connected to an internet box which is the DHCP server, flat network on vlan 1 only, no switch.All clients are getting an IP through the WiFi except one, a Samsung S10. To solve the...

VPN Gateway Virtual Appliance L2 VPN and 802.1x Authentication?

I have a VGVA configured on our corp network to terminate L2 VPN tunnels from EIQ AP’s used by staff working from home. This has worked well with PSK SSID’s. The user plugs in the AP, connects it via an Ethernet cable to their home router and off we ...

Configuring client-mode via CLI for AP230/250

Hello everyone,after uploading the newest firmware to the accesspoint I tried configure the client-mode via CLI. The web ui offers the possibility to scan for networks and then connect to a ssid. But the list of ssids remains empty and when manually ...

Resolved! Old AP230 running 6.1r5 trying to upgrade, error

Hello, I see this question asked multiple times. I have an AP230, fresh out of the box but with an old fimware on it. Everytime to try to upload a firmware through the Web interface or via TFTP, I get the following errors:------AH-136480#save im...

XIQ: proxy-arp and broadcast storms from wired network

I see large amounts of ARP traffic from the network with a single client on a test SSID bridged on a production vlan.I have proxy-arp enabled by default, or at least I think so (see https://docs.aerohive.com/330000/docs/help/english/ng/Content/gui/co...

Top Kudoed Authors

User

Count

12

7

6

5

4

GTM-P2G8KFN