Hello community, I have AP7562i is 3x3 with 3 RF connectors: R1-A,R1-B, R1-C. When disconnecting the antenna from R1-A connector, but R1-B & R1-C still connected to their connectors - the transmit power is dropped to near 0. It seems R1-B & R1-C R...
Hi, I have an RFS4010 with 5.9.2.4 installed. It has 5 ports. Until today i had 6 x AP6522's. 5 of the 6 plugged into that and 1 into normal network switches. All are also on 5.9.2.4 and they all work fine. I have recently purchased 4 x 7522's I ...
Do you have an estimated date for the Wing 5.9.3 release
Hi, i have two AP7522E. This firmware is AP7522E-5.9.1.3-007R. virtual controller IP is 192.168.20.12 & another AP ip is 192.168.20.10. Those are communicating one to one. but ap not adopted to vc. I checked following commands on AP & VC 1. ping 192....
Hi experts, We are facing a challenging issue with a huge plant of an existing customer, that needs to deploy a WLAN in a really big territory with metal scrap. The area is about 1.300.000 sqm and mostly during the year the temperature is below zero ...
