ExtremeWireless (WiNG)
Questions and discussions about WiNG devices
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! RFS4000 boot loop

Hi,I know that the RFS4000 controllers are very old, but we still have some locations where we use it.We have two RFS4000 controller in an Cluster running up more that 5 years. A few days before I had to configure an accesspoint and thought it would ...

grafik.png
DirkN by New Contributor
  • 584 Views
  • 2 replies
  • 0 kudos

5 Ghz SSID not availble

I have Extreme AP410e device . Wireless 5G SSID is not avalable even after adding to Radio2 5Ghz RF mode. Can anybody help . Config is below.! Configuration of AP410 version 7.5.1.2-008R!!version 2.7!!client-identity-group defaultload default-fingerp...

NoufalQA by New Contributor
  • 3309 Views
  • 11 replies
  • 0 kudos

Resolved! Signal disconnected and unable to connect

AC : NX7500 version 7.5.1.6-001R1. The APs emitted several signals, including the W1 signal(802.1X authentication). Yesterday, the terminals connected to the W1 signal was disconnected at 17:00 and could not connect to the W1 signal. The other signal...

Liuc by New Contributor
  • 608 Views
  • 2 replies
  • 0 kudos

Resolved! Unadopted AP

Hello everyone!AP not into in controller vx9000AP model: ap7532Problem:  Vx9000#show adoption log adopter2024-01-03 21:31:15:Sending MLCP Offer to 75.03.18.C0 (link_level=2, preferred=0, capacity=25567)2024-01-03 21:31:15:Adopted 74-67-F7-03-18-C0 (7...

GTM-P2G8KFN