ExtremeWireless (WiNG)
Questions and discussions about WiNG devices
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! Signal disconnected and unable to connect

AC : NX7500 version 7.5.1.6-001R1. The APs emitted several signals, including the W1 signal(802.1X authentication). Yesterday, the terminals connected to the W1 signal was disconnected at 17:00 and could not connect to the W1 signal. The other signal...

Liuc by New Contributor
  • 663 Views
  • 2 replies
  • 0 kudos

Resolved! Unadopted AP

Hello everyone!AP not into in controller vx9000AP model: ap7532Problem:  Vx9000#show adoption log adopter2024-01-03 21:31:15:Sending MLCP Offer to 75.03.18.C0 (link_level=2, preferred=0, capacity=25567)2024-01-03 21:31:15:Adopted 74-67-F7-03-18-C0 (7...

Wired ports AP302w

Hello, Apologize for the noob question, but thought I'd ask anyway. Currently have an ap302 joined to our Extreme Campus Controller running E2120 05.46.08.0004. I'd like to configure the wired ports to bridge traffic at the AP onto the switchport wit...

ccscott by New Contributor
  • 343 Views
  • 1 replies
  • 0 kudos

'Adoption failed': Connection error 145

Hello,I have VX9000E and about 40 AP6521 connected to it. After changing switches to Aruba I have an issue with adoption this AP by controller.AP has IP link with controller but is not adopting. It happend only on few AP, most of AP are adopted. For ...

GTM-P2G8KFN