how to correct configure snmp community in a RFS6000 controller

[Elias_Morais_Pe]

Hi,

I tried to set up a snmp community on the RFS6000 controller that we own, but it doesn't seem to be working.

I set up the snmp communit and then in Rule > Allow Permit > Type Any ACL I try to include the ANY option, but it returns an error about not having an IP.

See error below.

Detail :Not Available
Message :Invalid IPv4/mask format
ErrorPath :/wing-config/ip_snmp_acl[ name='cti' ]/ip_snmp_acl_rule
Severity :error
Type :Application Error
**********************************



Any idea?

[Elias_Morais_Pe]

Hi Christopher,

I got the MIBS file, but now the difficulty is to search for the information that the controller provides through SNMP.

I copied the mibs to the /usr/share/snmp/mibs folder of my ubuntu and ran the command below.


$ snmpwalk -M +/usr/share/snmp/mibs -v2c -c cti 172.16.15.1 1.3.6.1.4.1.388.50.0.4
SNMPv2-SMI::enterprises.388.50.0.4 = No Such Object available on this agent at this OID

$ snmpget -M +/usr/share/snmp/mibs -v2c -c cti 172.16.15.1 1.3.6.1.4.1.388.50.0.4
SNMPv2-SMI::enterprises.388.50.0.4 = No Such Object available on this agent at this OID

Does this result mean that the OID exists, that the controller returned the command, but did not find any data?

[Elias_Morais_Pe]

...

[Christoph_S]

Looks like it's an issue with 5.8.x which was resolved in 5.9.1.0.

BR.

------------------------------
Christoph S.
------------------------------

[Elias_Morais_Pe]

Ok.

Does this version 5.9.1.0 still support AP621?

If yes, can I download the firmware without a support contract?

[Christopher_Fra]

Hello Elias,
       Wing v5.9.1.x (last was v5.9.1.9) and yes, the RF6000/AP621 are supported under v5.9.1.x. You will require a support/software contract in order to download the firmware from our portal.

Thanks,
Chris Frazee