Network Architecture & Design - Page 17 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Cannot log on to Identity engine dashboard, via console is working fine.

Hi team, Logging on to the identity engine is not working anymore. I get the message : Access not allowed Allthough I know that I 'm using the right password of the 'admin' user to log on to. With that same password it's working in the console. I als...

EXOS Rate Limiting and Rate Shaping

Converting QoS EOS understanding to EXOS, which is causing me a little confusion..... My understanding between the difference of rate limiting and rate shaping is the former simply sets a red line, so anything above it can be dropped. Whereas the la...

NAC mappings does not distribute tagged vlans

Environment: Extreme Management Center 8.1.5.22 Switches D2, B5, S-Serie, X-440, EOX-Stack Switches configured with RFC3850, "set policy maptable response both and policy" "RFC3850 vlan authorization enabled" and "Filter ID With VLAN Tunnel Attribut...

VLAN Configuration

Does Extreme Switches have something like ;CISCO VTP" to configure VLANs on multiple switches.

Wireshark and Vmware Workstation are not running simulationsly

Since a much to long time i have an ugly issue that wireshark is not starting if i run a virtual workstation with my vmware workstation. Wireshark starts - i can see very quick a screen and then wireshark close at once! OS: Windows 7 Wireshark: V2.2...

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN