Hi, In the process of configuring MAC based Netlogin on some older switches, the configuration will look something like the following: create vlan nt_login configure netlogin vlan nt_login configure netlogin add mac-list ff:ff:ff:ff:ff:ff 48 config...
Hello, everybody, There are several questions about 220's stacking: 1) Could I stack 24 and 48 ports models? 2) Is the 10GB-C01- SFPP right cable model for 220 switches? 3) Do I need 4 cables for four switches, right? 4) Would it be the classica...
How do we identify which VLAN can pass how much amount traffic on the tagged port?
We have X440 switch as we take MPLS connection of 100mbps for connecting another site. We want to pass two VLAN on that port and prioritize vlan traffic. Example: VLAN 1= 80mbps VLAN 2= 20mbps How do we get prioritize this traffic?
Hi Guys, I am adding alerts on solar winds... but not sure if its correct or the way forward. current. I added the VC units IP address that works off icmp I then try to create an alert with all Nodes. but I am not receiving alerts UP , DOWN ect.. ...
