Network Architecture & Design - Page 21 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Comments welcomed on multicast configuration

Running two S4 cores, each with a VRRP instance to 25 individual closet switch stacks. I am enabling IGMP on each network in each core that we need multicast traffic extended to. There are 3 networks in each closet (student/employee/ipt) which will...

Question about VLAN Egress Priority at Switches (G3G and C5K, stativc vers. assign by auth))

Hello, I have the following problem: I have a managed 4 Port-Noname-Switch attached at a switch G3G124-24 at port ge.1.4. The managed 4-Port-Switch is manageable and has its own IP-Address and should be reachable via VLAN ID 400 but tagged. The G3G12...

Core Routing VLAN

Best practices for layer 3 network design and routing traffic

How i can check port congestion or buffer on Enterasys Secure Stack

I have a few issues lately with pause frames on my uplinks and im trying to discover where they come from and why? also if the ports indeed are congested so i need to find how to check the congestion or buffer on the switch ports im aware that a lot ...

Recommendations on oob management solution

Hello folks, looking for a solution similar to DRAC (Dell Remote Access Controller) for my extreme switches. We made a change to the sync port and took down 1 switch. Looking fo a solution to be able to manage the switch remotely similar to a ...

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN