Network Architecture & Design - Page 52 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

802.1x Authentication Problem

Hi,I have Enterasys B5 Switch. My switch configures 802.1x authentication as Extreme Networks video(https://www.youtube.com/watch?v=V8lMAMqLYmk) I connect my computer on switch port. My computer has an access to network without authentication. UPlink...

mac based vlan , multiple edge switches .

Configuration of mac based netlogin , when vlan spread over a number of switches. I am trying to limit the mac addresses that access a number of switches on the same vlan , from reading the Guides I understand the concept .. just putting this into p...

meter almost works for me. No counters via cli, via snmp, no snmp traps

Hi I have xos 16.1.3.6-patch1-8 on my summit670. Try to use meter as an ingress shaper to limit udp and icmp flood. Shaping seems to work but problem is with notification. As far as i tested, only syslog message works. Counters via cli still show 0,...

X440 G2 Stacking with 10GBASE-CR SFP+ 1m

Hi, short an quik: Is it possible to Stack 2 X440 G2 48p 10GE4 with 10GBASE-CR SFP+ 1m Cable? Thank you in advance 

Obtaining/Downloading Old Firmware Version (15.1.0.20)

Hello, Does anyone know if the ExtremeXOS 15.1.0.20 image is available anywhere on the download site? It appears the earliest available 15.x version is 15.1.1.6, but I was interested in the earlier version to debug a problem. If no link is availabl...

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN