Network Architecture & Design - Page 54 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

STPD Configuration

Hi all, on my customer i have two switch with configuration of STP. I paste configuration of only one switch, in the next days i have to install another switch with two links. Could you help me how i have to configure this switch without create outa...

We just search for SFP ports and SFP+ ports for Extreme switch , and is confused about the genuine one and third party one.

We have Extreme device that need SFP's and SFP+'s, but we just confused about the genuine and third party one. Someone who manufacture the third party one has sent me free sample to test, and it works well. So, the the genuine one or third party one?

S4 series chassis SLOT 2 COM LED not glowing

We have S4 Series Chassis loaded with S4 Chassis I/O Fabric Module: 48 ports 1000BASE-X at Slot 2.. When we try to communicate with chassis through hyper terminal, there is no response. We notified that LED on the chasis for slot 2 is not blinging....

Connecting a 100M switch to a 1G switch with fiber

If you have one 100 meg switch and one gig switch does the fiber have to have converter so they can see each other. Is a converter required? Had a splicer come in to repair fiber between two building one 100 meg and the other is a gig switch

OneView, whats the difference between basic and full versions?

I currently have NMS-Base-XX and I am looking into what features the other licenses give me that Base doesn't and one of them is a full OneView interface, what does this version have the basic doesn't?

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN