Network Architecture & Design - Page 56 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Support of L2 and L2CP Protocols over Metro Ethernet Network made with Extreme Networks Layer 3 switches?

Hi everybody, I have a metro ethernet network at work that we have recently changed most of the switches with Extreme Networks (most exactly X670G2 and X460) and one of my clients is making us the question about support os L2 and L2CP protocols like...

Need help with network design

Hello, I am currently trying to find/test the best solution for the network below: Switch X670-1,2,3 and 4 are already in use, switch X670-5 and 6 are new. 1,2,3 and 4 are currently connected with MLAG. X670-1 and 2 are present on ...

arp

Hi All When machines send packets through L2 to L3, if the L3 forwards the same packet to a different VLAN, it drops the original MAC ID and in turn uses its own (replaces) interface MAC ID in the forward. can be configured to pa...

Restoring Backuped Configs to EOS based B5 Switch using. TFTP

Hi Guys, I am having a challenge restoring backed up Configs of some of my B5 Switches saved with netsight. My challenge here is there is no communication between those switches and netsight to restore from netsight. Those switches were fault...

Console Connection to an x440-8?

Excuse my ignorance, but I am having my first experience with an x440-8. Can I ask how do you console to the device? I need to complete the initial configuration of the device and can't seem to figure out how to connect to it. Thanks, Stan

Top Kudoed Authors

User

Count

4

3

3

2

GTM-P2G8KFN