Network Architecture & Design - Page 83 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

SFP in SFP+ port BD8800

Hi all ! I've been looking in the GTACK but can't find my answer precisely : Is it possible to use 1Gb SFP transceivers in 10Gb SFP+ ports of a 8900-10G24X-c card (ref 41632B) on a 8810 chassis ? (latest EXOS 15.5.4.2) I've seen it's ok for S-series...

BGP Edge router suggestions?

I think I may start approaching our 480s' boundaries. We're a multihomed datacenter, connected to let's say 4 upstream providers We have two providers each on two 480s. We receive FULL Internet routes + default from all 4 providers We receive/advert...

Extreme VSS and NFS (CISCO)

Hello guys, I would like to connect two switches stack and configure they like a NFS or VSS like cisco devices, to provide more redundancy if one member fail all traffic, RIB, mac-table and so on will be forwarded to another member, its possible do ...

FlowRedirection Based Transparent Web Cache Redirection?

We're currently using a Cisco for WCCP Redirection of HTTP traffic to a cache server (ISP) We have 2x MLAG x670 for our Core that feed into that Cisco, as you can see now we have a point of failure which we don't like and it's EOL, and not 10G) Wha...

Does XOS have a feature like Cisco IP SLA+PBR(Policy base Route)

I need same fature Cisco IP SLA it is possible to monitor some Proxy by ping. Normally, traffic use PRB1 forward some traffic to Proxy(Bluecoat). But, Proxy(Bluecoat) down change route to static-route. finaly, Proxy(Bluecoat) up change route come b...

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN