Network Architecture & Design - Page 84 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

FlowRedirection Based Transparent Web Cache Redirection?

We're currently using a Cisco for WCCP Redirection of HTTP traffic to a cache server (ISP) We have 2x MLAG x670 for our Core that feed into that Cisco, as you can see now we have a point of failure which we don't like and it's EOL, and not 10G) Wha...

Does XOS have a feature like Cisco IP SLA+PBR(Policy base Route)

I need same fature Cisco IP SLA it is possible to monitor some Proxy by ping. Normally, traffic use PRB1 forward some traffic to Proxy(Bluecoat). But, Proxy(Bluecoat) down change route to static-route. finaly, Proxy(Bluecoat) up change route come b...

MLAG two tier design, lacp config for win 2013 servers

We are now testing following MLAG two Tier Design 2 BD8810 connected together with two 10Gbit LACP LAG 2 X670 connected to the BD's with 2x10Gb LACP LAG, each X670 is connected with one of Link to BD1 and the other to BD2 BD1 ---ISC-- BD2 --> VRR...

p2p OSPF convert to OSPF+(VRRP+MLAG)

Ok we used to have a pretty simple setup Site 1 -> OSPF p2p -> Core Site 2 -> OSPF p2p Site 3 -> OSPF p2p That way we could redistribute our customers (/30) back to our Core so that the Core would be able to send traffic to the proper site, Worked...

Details about Logging Severity levels

Hi All, Could send me infs about Severity Levels and logging?I want to know what kind of logging messages was send in each severity level, from 1 to 8. I know that 1(Emergencies), 2(alerts), 3(critical), 4(errors), 5(warnings), 6(notifications), 7(i...

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN