Network Architecture & Design - Page 9 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

OSPF establishes adjacency, but no routes are exchanged

Hi, a customer had a relatively common problem concerning OSPF, but did not find the solution searching the web. This post is supposed to help others find the information that is already out there. OSPF was configured between two Extreme Networks s...

Resolved! Allowing only one end-system per domain user?

Hi all, Short background info : On our network, users authenticate for wired and wireless network with 802.1X. The users and computers are retrieved from our Domain controller. The AD is the primary radius server linked to 2 NAC virtual appliances, ...

XMC Alarm Mail Delay Config

Hi All, I have alarm config on xmc, it's emailing me when device down and all working fine. There are a lot of locations in the company and there can be electricity issues in short-term, approx 5 mins. I don't want to get email in this 5 minutes, ...

Impact Analysis - Device Availability

Hi Everyone! We’ve recently begun rolling out XMC to monitor all of our schools. Our tech support department likes to have dashboards running on TVs around the building, so that people can see when network equipment goes down. We really like the...

Fetch serial number and firmware version of All AP connected connected with Extreme Wireless controller RFS-4000

I am looking for ways to fetch serial number and firmware version of All AP connected connected with Extreme Wireless controller RFS-4000 programatically Using SNMP or any other way. Please suggests!

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN