Hello,Please check out the following resources: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000107795https://extreme-networks.my.site.com/ExtrArticleDetail?an=000079835https://extreme-networks.my.site.com/ExtrArticleDetail?an=000082067T...
Hello,Yes, you can use any combination of SSID and AP ID criteria. It's been a while since I've looked at the AP location integration. I want to say this was an integration with the Identifi controller where we could sync maps between the controller ...
Hello,In XIQ-C, please go into the AAA configuration for the WLAN and select the Called-Station ID injection information that you'd like to use: You will then use the desired information within the "AP ID" field for the location group matching.Contro...
A key point that you have set here is that you have "AP Aware" enabled. This is required for Access Points or else there can be performance impacts on the network.AP Aware makes it so if the switch port sees an AP Aware policy it won't attempt to aut...
Hello,This is a common configuration for clients who have an Extreme Control appliance. 1. The switch will need have to have authentication enabled with a policy that will only authenticate the AP and not the underlying Wireless Clients. In Extreme C...
