Hello all,I have a NAC system that work around my LAN.Then I have a WIFI system (VE6120 Medium 10.04) on the same LANI've deploy some AP's to distant branch, on one site is all ok, while the other is not despite they have the same configuration.For t...
Just picked up a gently used AP410E for lab testing. I configured the 5GHz antenna to use 4x4 mode -- it was set to 2x2 by default.However, when I look at the radio status under statistics, it shows 2x2 mode. Am I misunderstanding something about how...
I have a cluster vx9000 and will adopt a AP310 remotely (L3)After adjusting the settings ip-mac conflict" and "ip-mac routing conflict, I can connect to the AP.The autoprovision rule is configured. however the AP connect to th RF-default instead con...
On my 7532 AP, running 7.7.1.9 code, the authentication-type sae-psk command (used for WPA3-Transition Mode) no longer works when fast-bss-transition is enabled. It will not allow you to commit the config and throws an error. This was working in prev...
how to know a AP is in mesh connection or not. is their any commands to show the status of mesh connection with whom it is connected?? please help.
