Aerohive Migrated Content
Questions and discussions related to old aerohive products migrated over
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Cant add 2024P to dashboard

Hello,   I just got a Aerohive 2024P and cant add it to my dashboard as it says device not supported. I read in the datasheets they are. How to i go about adding this to my account. I have already removed and disposed of my old switch and need this...

Does RADIUS authentication continue to authenticate if the AeroHive controller is offline? (i.e.: does it continue to communicate directly with the APs)? (Assuming it's correctly configured but the controller suddenly goes offline)

Does RADIUS authentication continue to authenticate if the AeroHive controller is offline? (i.e.: does it continue to communicate directly with the APs)? (Assuming it's correctly configured but the controller suddenly goes offline)

mns by New Contributor
  • 558 Views
  • 1 replies
  • 0 kudos

Resolved! AP230 failed to update the firmware

The actual firmware is the 6.1r6a, I want to update progresive to the 6.5r4 but I recibe the mesage "Device Update Failed. The AheroHive device was unable to save the image to flash memory . Rebootr the AeroHive device and try again.", but this doe...

d5e46faef3a348a1a7c77918c1f0fb97_0690c000008OsINAA0.jpg
egomez1 by New Contributor
  • 3292 Views
  • 13 replies
  • 0 kudos

Resolved! How do I get the serial number of Aerohive AH-AP-170

Hi everyone,   How do I get the serial number of Aerohive AH-AP-170? It isn’t printed anywhere on the metal box and what I see inside, MAC of the radio and serial number of the RF module is NOT an Aerohive serial number? There’s no serial console ...

bubba198 by New Contributor
  • 2906 Views
  • 2 replies
  • 2 kudos

Upgrade of AP121 via CloudIQ from existing version 6.1r1 to latest version (6.5r12) goes to 9% then failed. Is there any public download of that particular firmware available to upgrade via CLI? Thanx for your help -mn-

Upgrade of AP121 via CloudIQ from existing version 6.1r1 to latest version (6.5r12) goes to 9% then failed. Is there any public download of that particular firmware available to upgrade via CLI? Thanx for your help -mn-

MatzeKS by New Contributor III
  • 843 Views
  • 2 replies
  • 0 kudos
GTM-P2G8KFN