List of port device X series
Do anyone say me why in netsight I show the list of the port of my switch (X series) in this way 1,2,1000 1002, 1003 ecc ....? Instead the list of port of the switch B5 series is ge 1.1, ge 1.2 ecc.....
Forum Posts
Script that sets port alias based on LLDP; Update Alias if device moved.
Anyone come up with a good idea for automating port aliases? Being able to run a script on the that sets port description based on lldp would be useful. Or if a device gets moved having a way to move the alias with the device would be useful.
Create a script that will automatically toggle POE on a port if an AP goes down
One of the first things we try to do if an AP goes down in the controller is to find where that AP is and toggle POE. It would be neat to have a script in netsight that would automatically do this to a port if it detects that an AP went down.
How to block IP Scanner Software using EXOS Switch...
Hello, We have around 40 numbers of x440-24P EXOS based Switches in our campus. Some of the users connected in these Switches using different open source softwares to block the network or limit the bandwidth of others who are connected in the same ...
learned mac address refer to group
I have created a DEVICE GROUP with ITS INTERNAL only two port/pc so I STARTED the flexview "learned mac addresses" to know if the 2 pc are turned on but my view show nothing.
