ExtremeCloud IQ- Site Engine Management Center - Page 208 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Enable ssh2 or telnet on XOS without using the console port

Hello, at all! I have made a mistake by disabling ssh2 and telnet on an X460G2 (fw 22.4.1.4). And now i can't manage the switch per remote. Is there a possibility by enabling ssh2 or telnet on this switch without driving to the system and using the c...

Fan Monitoring

We need to monitor the fans of 31 Extreme switches in our network using NPM. The OID that I used to monitor the fans is "1.3.6.1.4.1.1916.1.1.1.9.1.2" and the result always "1" even when there is a fan fault. We have a switch the fan LED is blinking ...

Device down alarm delay

Hi all Is there any way of delaying a device down alarm. I was thinking of tweeking the SNMP polling interval, but don't know if this will affect any other alarms. Thanks

configure an ip-address on a PV-FC-180

how can I configure a management IP-address on a PV-FC-180. Iám not familiar with this hardware

How to Upgrade Third Party Switches Via Netsight

Hi Community, Is it possible to upgrade third party switch firmware through Netsight? How we can do that? Thanks in advance!

Top Kudoed Authors

User

Count

82

75

39

17

16

GTM-P2G8KFN