Hi team,I had deployed an IXQ-SE with VSP devices, these are registered as syslog and trap recivers on it , but when a spb adjancencie is lost, no event is sent from VSP to XIQ.Please, any idea? aditional configuration is nedded?RegardsEF
Hi,Based on the screenshot below I need to change the default value of 'Min. Data Required' from 100 to something like 10 to show any meaningful data:What I am struggling to find is where the change the default value so I don't have to keep manually ...
I have used XMC to upgrade switch firmware and software in the past.I am now looking to also upgrade the POE, but the POE image is not visible when choosing images within the "upgrade Firmware" section.Am I missing something?thanks,
We have a mixed environment with Cisco und Extreme Switches and monitored with XMC.On Extreme we controll the LAN acces with Extreme Control. Does anyone have experience how can I search in Compass MAC addresses that are learned on Cisco Switches?Or ...
If I right click on one of my switches > configure > enforce preview at the I see in the Match column Device, VLAN Definitions, LAGs, Ports. Some of my switches show that VLAN definitions are "Not Supported" some of my switches show LAGs as Not Supp...
