ExtremeSwitching (ERS) - Page 17 - Extreme Networks

ExtremeSwitching (ERS)

Questions and discussions about ERS

Forum Posts

Sorted by:

Start a conversation

Resolved! ERS4950GTS-PWR+ - Base unit replacement

I wanted to get some guidance on replacing a base unit in a stack please.I have read through: https://extremeportal.force.com/ExtrArticleDetail?an=000086890 but am a little unsure.Can I set a working switch within the stack to the base (flick switch ...

Resolved! SSL Certificate on ERS switch - no actiovation

Hello,I deactivated ssl with “no ssl”Than I removed the installed one with:no certificate ca <your_ca_name> use-forno certificate ca / keyI ve imported an ssl-certificate with the import-command.I do an ssl reset…Than it generates a new certificate, ...

Resolved! How to exclude and release IP addresses from DHCP in ERS ?

I currently have an ERS 3526T with Software Version v5.3.12.009,I can't find a way to exclude and release a DHCP assigned IP address.is it possible to exclude and release IP addresses from DHCP? How do I do it? Thank you in advance for your help

ERS 4826 GTS-PWR+ | Agent Code Checksum Failed

One of our customers had their legacy stack’s base unit fail, and I replaced the failed unit with a spare one that they had on site. The “base” switch at the back is on, and the stacking cables in the rear are as they were on the failed unit. I power...

Resolved! Factory Reset GTS4950-PWR+

Hello all. Well I goofed up in uploading a config to the GTS4950 and now I cannot log back in via the console port. Something broke (that is, was configured wrong) when the Console access user name and password were entered. I have tried using the ...

Top Kudoed Authors

User

Count

3

2

2

2

1

Latest Photos in ExtremeSwitching (ERS)

GTM-P2G8KFN