ExtremeSwitching (ERS) - Page 2 - Extreme Networks

ExtremeSwitching (ERS)

Questions and discussions about ERS

Forum Posts

Sorted by:

Start a conversation

Resolved! EAPOL Init vs EAPOL Reauthenticate

Hi can somebody tell me what the difference is betweeneapol init and eapol reauthenticate on the port level on the ERS 4950s?There appears to be a scenario, where after boot up, some devices get stuck on the EAPOl guest vlan until someone runs eapol ...

Resolved! MHMA MultiVlan

Hi - I am trying to figure out a way to use MHMA-MV mode in the following situation. I have an ERS 4950 using XMC NAC. An unmanaged switch is plugged downstream with multiple devices plugged into it, lets say 1 PC, 1 Phone, and 1 Printer etc. Each...

Resolved! ERS switch (4800, 4900) and LLDP for Avaya VOIP phone

Currently we use DHCP options for setting up our Avaya phones (mostly 9600's and J100's). It works, usually, and was wondering if LLDP would work better.I've seen examples/docs for setting up EXOS, but not ERS. So some help would be appreciated. Read...

ERS4800 SPBM Dropped Frames

Recently converted a link between an ERS4900 and ERS4800 to ISIS/SPBM. We began experiencing a lot of dropped packets. We had no issues withe the untagged PVID VLANs, but the tagged VLANs (voice VLAN) would drop about 50%. Jumbo frames are enabled. A...

ERS 3626 GTS PWR

I am unable to console the switch, Switch has shown like error language Plus i also get a static shock while handling the switches

Top Kudoed Authors

User

Count

3

2

2

2

1

GTM-P2G8KFN