ExtremeSwitching (EXOS/Switch Engine) - Page 110 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

not able to configure sharing when using GNS3

I Start using GNS3 (Version 22.1.1.5) and trying to set up a link aggregation. When using the standard sharing command I'm getting the following error: * EXOS-VM.3 # enable sharing 1 grouping 1-2 algorithm address-based lacpError: PC environment su...

Resolved! Port Speeds and stacking

Hey guys it’s me again sorry for all the questions but I am still learning all this Extreme Switching stuff. I now have a new problem. So I have 8 Extreme X440-G2’s in my MDF and 6 in my IDF. I am using ports 51 and 52 with Cat6 jumpers to connect th...

Resolved! Problem with configuring x670 port speed from 1gb & 10gb

Hi Guys, I have a problem configuring x670 switch from 1gb to 10gb port configuration, steps1 and step2 worked but step3 i want the port 2:1 to reconfigure back to 10gb but i get the error mentioned below. Is there a way to reconfigure 2:1 port to 10...

Resolved! Problem with X670V port

Hi,I’m having a problem with X670V port. In my set-up it’s connected to port of X460. This is how it looks in port information details:on X460: Type: UTP Random Early drop: Unsupported Admin state: Enabled with ...

Resolved! BGP peering with Service provider using X460G2

Hello everybody, I’m working on a project to peer BGP with 2 Service Provider, and it’s my first time using Extreme networks; my question is : Is the Extreme Networks X460-G2 enough to be used ONLY for the BGP peering(2 peer : iBGP and eBGP) ?If yes,...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN